INTRODUCTION:
This model adopts Japan AC digit servo control system,7 inches colorful display screen of resolution rate is 0.01mm, has self-diagnostic function of troubles and displays the operating pattern, It has 100 program units, more than 5000 different cutting position the max paper pushing speed is 5*16m/min. It adopts stronger computer operating. It can memorize store the storage time can be up to 200000 hours above. It has self maintenance to the operating system. Adopt Japan hydraulic components, Japan and Korea electric components. Taiwan ball lead screw and linear guide-rail are used. PLC controller can monitor all the electrical and mechanical section. Its key parts adopt imported bearing of low maintenance.
MAIN FEATURES:
1. Ball lead screw and linear guide-rail makes paper impeller run smooth, low noise, accurate positioning, enhance the cutting precision and speed greatly, prolong the service lift of paper cutter.
2. The working tables are all chrome-plated and equipped with air balls which makes paper-pushing easily and rusty-proof. Large side working table (1000 x 800) is optional.
3. IR photoelectric protection, buttons by two hands safety devices.
4. Safety device for knife bed, overloading protection for cutting, automatic return safety device.
5. Imported hydraulic components are adopted in hydraulic system, the pressure can be adjusted. The paper is pressed twice by pressure-increased system.
6. Mechanical assistance device for knife replacement makes knife replaced quickly and safely.
7. Equipped with the optical knife alignment to make cutting more convenient.
8. PLC control system.
9. Ejecting device for knife bar.
10. Flat worm speed reducer transmission.
11. Multination language operation interface.
12. Carry on the block programming operation through the figures and diagrams operation manual.
| Model |
78K |
92K |
115K |
| Cutting width |
780mm |
920mm |
1150mm |
| Cutting depth |
Max.780mm |
Max.930mm |
Max.1150mm |
| Working table length |
1780mm |
1980mm |
2260mm |
| Cutting speed |
45times/min |
45times/min |
45times/min |
| Pressure |
Max.30000N |
Max.35000N |
Max.40000N |
| Weight |
2250kg |
2400kg |
4000kg |
| Dimension |
2100x1400x1950mm |
2250x1400x1950mm |
2550x1600x2150mm |
| Model |
130K |
137K |
155K |
| Cutting width |
1300mm |
1370mm |
1550mm |
| Cutting depth |
Max.1300mm |
Max.1450mm |
Max.1550mm |
| Working table length |
2410mm |
2590mm |
2800mm |
| Cutting speed |
45times/min |
45times/min |
42times/min |
| Pressure |
Max.40000N |
Max.45000N |
Max.55000N |
| Weight |
3860kg |
4150kg |
5200kg |
| Cutting width |
2600x1530x1950mm |
2800x1600x2150mm |
2960x1650x2150mm |
| Model |
166K |
186K |
| Cutting width |
1660mm |
1860mm |
| Cutting depth |
Max.1660mm |
Max.2000mm |
| Working table length |
2830mm |
3270mm |
| Cutting speed |
42times/min |
40times/min |
| Pressure |
Max.60000N |
Max.65000N |
| Weight |
5300kg |
6800kg |
| Cutting width |
3150x1600x2150mm |
3400x1820x2300mm |
| Model |
220K |
260K |
| Cutting width |
2200mm |
2600mm |
| Cutting depth |
Max.2200mm |
Max.2600mm |
| Working table length |
3550mm |
4000mm |
| Cutting speed |
33times/min |
30times/min |
| Pressure |
Max.70000N |
Max.70000N |
| Weight |
10200kg |
13000kg |
| Cutting width |
3900x1900x2700mm |
4000x2200x2200mm |
Our service
At SHM
, you can expect satisfactory customer service with long tradition. We are highly devoted to the most optimal solid and liquid separation solutions to meet your specific needs. We have the effective service system to ensure professional and flexible management of any affairs.
1.Pre-sales technical consultation
2.Model selection
3.Machine guidance
4.Operation & maintenance training
5.Maintenance service
6.Quick supply of spare parts
7.Customer satisfaction track
After-sale Service
SHM
promises that all machines made by us come with services of repair and replacement. Machine warranty is 12 months. We provide free repair services to any failures caused by us within warranty time. However wearing parts are not included.
1.Any quality failure problems happens within guarantee period, we will reply within 4 hours after receiving your request.
2.SHM will provide lifelong maintenance service to all parts and regular maintenance to flatbed die cutters.
3.We will handle any quality failure occurred within warranty time.
4.We will provide lifelong technical support started from using of the machine.
5.We will supply normal parts within warranty period to ensure better user experience. Parts supply will be charged after warranty period.
FAQ
Q : What about the price of the machine?
A:Pls contact with our sales manager to get quotation or pls send mail to us to get more information.
Q:How long is the warranty of the machines ?And other Service ?
A: Warranty is 12 months after the machines arrive.
Our engineer can provide service overseas if you need.
And we also provide installation and operation training.
Q : How about your delivery time ?
A:The delivery time is within 30-60 days depend on the different type or machine. Pls contact with us to learn more.
Q:What`s the price term and payment method?
A:We usually use Fob, CIF and CFR.
Payment method : 100 % T/T (30% deposit + 70% before shipment ) OR 100% L/C.
Audited Supplier 
){kind=link}